Happymodel Mobula7 Crazybee F3 Pro, drone test, photos, videos, range and flight behavior

Entertainment factor
Flight behavior
Material quality
Recording quality
Price quality
Overall rating 3.9 / 5

If you are looking for an especially small mini FPV racing drone, you should look at the Happymodel Mobula7 Crazybee F3 Pro.

The standard version of this model is compatible with the Frsky Non-EU receiver. A 700TVL BNF camera is used as a camera.

The drone has the advantage of being compatible with the 2S lipo battery, but 1S batteries can also be used. Visually, Happymodel Mobula7 Crazybee F3 is very similar to the URUAV UR65 drone.

However, compared to the competition, the drone is incredibly fast and extremely high quality. Drone is a lot of fun and in our opinion it is one of the best models in the mini drone sector that you can get for this price.

If you are good at it, this drone is great for you. Some buyers have problems reaching the maximum range, in which case you should switch to D8 mode and disable telemetry.

Technical data and facts

The 0802 brushless motor is extremely powerful and propels the drone to high speeds in a very short time.

Thanks to the LED illumination, you can fly great at dusk or in the dark and always have the drone in sight.

It responds incredibly quickly to control commands, which is of course very important in drone racing!

Lucky model Mobula7 Crazybee F3 Pro, of course, will suit beginners too. However, it takes a little practice to learn how to handle this little powerhouse elegantly.

Design

The design is really very unusual and looks rather unusual. The propellers are orange in color and are protected against collision or collision with a white ring.

You can see a small antenna underneath the circuit board. It looks elegant and not particularly annoying.

Compared to other drone models, the camera is not located at the bottom, but at the top and bottom of the 4 screw drives.

With wind and rain, don’t fly with the Happymodel Mobula7 Crazybee F3 Pro. Since the drone is very light, it is of course very sensitive to wind and therefore not suitable for use in gusts of wind. If it rains, moisture will also get onto the board because the case is not waterproof!

camera

The camera is a 5.8G VTX AIO camera with FPV transmission and 700TVL resolution.

The cam operates at 5.8 GHz and has a field of view of approximately 120 degrees. Weighing in at 3g, this camera is very light and therefore ideal for use with racing drones.

Drone battery and flight time

In our opinion, the battery is a bit poor. With 250mAh, you only have a few minutes of flight time. How long you can actually fly with this model also depends on your flying style and battery level.

We recommend that you always bring some fully charged flight batteries with you during flight so that you can replace them if one of them runs out.

The batteries included in the package are 1 cell, but the drone also supports 2S batteries.

Pros and cons

Privileges:

  • Very suitable for beginners and advanced users.
  • The MPU-6000 is used here as a sensor unit.
  • Supports batteries with modern 2S system
  • CRAZYBEEF3 PRO FR firmware
  • Led
  • Adjustable camera angle
  • Full telemetry functions
  • Screw protection available
  • Also has greater impact resistance

Disadvantage:

  • Not so good for professionals
  • Low battery
  • Wind sensitive, splash and rain resistant

Delivery scope

Which package you receive depends, among other things, on whether you choose the basic package or the standard version in the store.

Scope of delivery for standard version:

  • 1x 75mm Mobula7 FPV drone
  • 4 x 40mm 3-blade propellers (4 clockwise and 4 counterclockwise)
  • 4x 3.8V 250mAh 30C / 60C Lipo battery
  • 1x 1S06 6-Position Lipo / LIHV Charger
  • 1x propeller disassembly tool
  • 1x Lipo battery mount (bracket)
  • 1x screwdriver

Scope of delivery for basic version:

  • 1x 75mm Mobula7 FPV drone
  • 4 x 40mm 3-blade propellers (4 clockwise and 4 counterclockwise)
  • 4x 3.8V 250mAh 30C / 60C Lipo battery
  • 1x USB Lipo / LIHV charger
  • 1x Lipo battery mount
  • 1x propeller disassembly tool
  • 1x screwdriver

The big difference between the basic version and the standard version is the charger!

Who is the drone for?

If you’ve read some of our reviews before, then you know that we don’t recommend racing drones to every beginner. However, this small model is quite stable and can withstand one or another fall or collision with other objects. Therefore, the happy Mobula7 Crazybee F3 is also ideal for beginners.

However, professionals are unlikely to like this plane as the camera is not enough for professional requirements and it is more of a mini drone!

Conclusion

In our opinion, this inexpensive drone is indeed very successful. The processing quality matches this price, and the FPV transmission is stable. Of course, this is not a DJI model, but this is not the price range we are talking about.

You get enough quality for little money, and especially for newbies looking to try out a racing drone, the Happymodel Mobula7 Crazybee F3 Pro should be considered.

Here in the store you can choose the right set and order it conveniently online! *