LHI 250 quadcopter test: exciting racing drone, flight range, flight characteristics, photos and videos

Entertainment factor
Material quality
Flight behavior
Price quality
Overall rating 4.4 / 5

We looked again for a remote controlled racing drone and came across an LHI 250. It’s a kit. Therefore, we recommend this model to especially experienced amateurs among you.

All parts of this drone are also offered individually by the manufacturer on Amazon. So, if necessary, you can buy spare parts quickly, easily and inexpensively.

The frame elements are made of carbon fiber, high quality carbon fiber.

Of course, the scope of delivery also includes a remote control with which you can control the LHI 250 drone.

Technical details

You can also buy this assembled model from Amazon. Most of the parts are already connected to each other, so all you have to do is unscrew the propellers and you can take off.

In the mounted version, the drone is tested by the manufacturer before shipping. The high precision of manufacturing shows that not only high-quality materials were used here, but also the assembly was carried out by professionals.

Not only the material speaks in favor of the LHI 250 drone, but also its flight characteristics and good price / quality ratio. Since this is a racing quadcopter, unfortunately there is no stabilization system. So beginners need to practice a bit until they get good at flying the LHI 250 drone in the air.

Since the weight is very light, the flight model can reach extremely high speeds. This is especially handy if you want to participate in quadcopter racing.

Case design and construction

We will link you to the fully assembled model below. However, if you’re looking to order a kit or replace a component, even beginners have a good chance of getting by. However, the help of an experienced amateur will not hurt.

The model measures 25 cm x 20 cm x 7 cm. Thus, it corresponds to the typical dimensions of a racing drone.

The hull was fitted with some rubber bumpers to prevent vibration from spreading too much during flight. This provides a more stable position in flight.

In addition, the light weight comes in handy because it makes the drone model much more maneuverable, able to accelerate faster and reach a high top speed. Carbon fiber was used as a material to keep the LHI 250 drone as light as possible.

Four electric motors are used as a drive, which run especially smoothly and cause little vibration. These are MT2204 2300KV motors.


This is only the basic model, so unfortunately there is no camera included.

The kit supports HD cameras and FPV image transmission. You need to order and assemble the relevant parts yourself.

Battery and flight time

The battery is also not included in the package. Many people buy Turnigy 2200mAh 3S 20C -30C Lipo Pack (up to 2C rechargeable) molinoRC and SKYRC e Series Balance Compact Charger Inteligente Lipo for RC batteries (15W). You are well prepared for this.

Please note that the LHI 250 drone does not come with a battery!

The Turnigy battery we recommend has a capacity of 2200mAh. The maximum achievable flight time depends a lot on the battery you choose and your flight behavior!

Pros and cons


  • Super basic drone racing quadcopter
  • Easy assembly even for beginners
  • Strong, durable and lightweight material
  • Extremely agile and agile
  • Reaches very high speeds
  • High quality remote control


  • No battery included
  • There is no camera


This racing quadcopter is well suited for beginners, but neither battery nor camera is included.

If you don’t notice these two drawbacks, you are getting a great racing drone.

You can order the LHI 250 quadcopter here on Amazon! *